How to maintain the packaging machine

We all know that our packaging machine products need to be maintained during daily use. Otherwise, the machine is prone to failure or reduced packaging efficiency. In order to make better use of the packaging machine, daily maintenance is very necessary, so what should be paid attention to in the daily maintenance of the packaging machine?

The packaging machine has compact appearance, practical functions, convenient operation and economical price. The combination of a new generation of technology meets the needs of daily life to a large extent. Traditional manual packaging is inefficient and dangerous. When mechanical packaging replaces manual packaging, the overall efficiency is significantly improved.

The maintenance of the packaging machine by the packaging machine manufacturer is very important for long-term use.

1. The box is equipped with a dipstick. Before starting the packaging machine, fill all positions with oil, and set the specific oil filling time according to the temperature rise and the operating conditions of each bearing.

2. Long-term oil storage in the worm gear box. When the oil level is high, the worm gear and worm will seep into the oil. In the case of continuous operation, replace the oil every three months. There is an oil drain plug at the bottom for draining oil.

3. When refueling the packaging machine, do not allow the oil cup to overflow, and do not run the oil around the packaging machine or on the ground. Oil easily contaminates materials and affects product quality.

For the maintenance time of the packaging machine, the same regulations are made:

1. Check the parts regularly, once a month, check whether the bolts, bearings and other moving parts on the worm gear, worm, lubrication block are flexible and worn. If anomalies are found, repair them in time.

2. The packaging machine should be installed in a dry and clean environment, and should not work in an environment containing acids and other corrosive substances to the human body.

3. After using or stopping the operation, take out the drum, scrub the powder remaining in the drum, and then install it for next use.

4. If the package is not used for a long time, wipe the entire package clean, and the smooth surface of each part should be coated with anti-rust oil and covered with a cloth.


Post time: Aug-08-2021
+86 13600682556