Company News

Installation and Training for Anchuang Paper Straw Making Machine

admin 679

Anchuang machinery company will arrange the engineer to client factory when client receive the machines.There are five points for installation,debugging and training.Client can evaluate our service according to these point.After finish his work,the engineer will offer a debugging acceptance form, please fill this form for our company so that we can provide best technical support in the future.
The first point,the engineer will test the machine and set up the machine with electricity and air.Then he will do the debugging and training until the machine is running good.
The second point,the engineer will explain every step with client’s worker.Combined with practical operation,let the worker learn the production of the paper straw.
The third point,the work pilot run the machine, The engineer guides the workers on the spot and starts the production
the engineer will disarrange the position and angle of the equipment that has been placed before, and reconnect the wiring and air connection.The engineer will simulate the whole process of installation, debugging and starting up production.Detailed explanation, combined with practical operation.On-site teaching enables operators to understand and understand the entire installation, debugging and production process of paper straw equipment.And instruct the operators on site to learn and operate this process.

The whole process includes:
1.The engineer set up the machine, install the tie rod, forming mold, cutting tool pad, adjust the tie rod and cutting tool pad in a straight line.
2.The machine will be connect with elecricity and air consumption.
3. Adjust the space between the left and right sides of the cutter and the position of the cutting tool.Put the belt.
4. Install and adjust the position of paper frame and glue frame.
5. Be familiar with the operation interface and parameter setting.
6. Paper loading (for straw of different sizes, please pay attention to the specification of the surface paper and the bottom paper), glue on the plastic tray, adjust the glue and pull the paper.
7. In the production of paper feed coil pipe, check whether the fold seam and incision of paper straw are neat, whether the length is consistent and whether it meets the standard.
8, stable production speed, paper, speed.If the quality of paper straw meets the standard.
9. Produce paper straw of different specifications;Modify the parameter setting, adjust the feed Angle, adjust the cutter distance, and adjust the position of the paper frame and glue frame.
The fourth point,the worker start up production independently, make paper straw with different sizes, get familiar with equipment, find problems, consult with the engineer, and solve problems by himself under the guidance of the engineer.
After installation,debugging and training,the client fills the form and give the engineer .Anchuang machinery company will arrange the engineer to client factory when client receive the machines.There are five points for installation,debugging and training.Client can evaluate our service according to these point.After finish his work,the engineer will offer a debugging acceptance form, please fill this form for our company so that we can provide best technical support in the future.
The first point,the engineer will test the machine and set up the machine with electricity and air.Then he will do the debugging and training until the machine is running good.
The second point,the engineer will explain every step with client’s worker.Combined with practical operation,let the worker learn the production of the paper straw.
The third point,the work pilot run the machine, The engineer guides the workers on the spot and starts the production
the engineer will disarrange the position and angle of the equipment that has been placed before, and reconnect the wiring and air connection.The engineer will simulate the whole process of installation, debugging and starting up production.Detailed explanation, combined with practical operation.On-site teaching enables operators to understand and understand the entire installation, debugging and production process of paper straw equipment.And instruct the operators on site to learn and operate this process.

The whole process includes:
1.The engineer set up the machine, install the tie rod, forming mold, cutting tool pad, adjust the tie rod and cutting tool pad in a straight line.
2.The machine will be connect with elecricity and air consumption.
3. Adjust the space between the left and right sides of the cutter and the position of the cutting tool.Put the belt.
4. Install and adjust the position of paper frame and glue frame.
5. Be familiar with the operation interface and parameter setting.
6. Paper loading (for straw of different sizes, please pay attention to the specification of the surface paper and the bottom paper), glue on the plastic tray, adjust the glue and pull the paper.
7. In the production of paper feed coil pipe, check whether the fold seam and incision of paper straw are neat, whether the length is consistent and whether it meets the standard.
8, stable production speed, paper, speed.If the quality of paper straw meets the standard.
9. Produce paper straw of different specifications;Modify the parameter setting, adjust the feed Angle, adjust the cutter distance, and adjust the position of the paper frame and glue frame.
The fourth point,the worker start up production independently, make paper straw with different sizes, get familiar with equipment, find problems, consult with the engineer, and solve problems by himself under the guidance of the engineer.
After installation,debugging and training,the client fills the form and give the engineer .Anchuang machinery company will arrange the engineer to client factory when client receive the machines.There are five points for installation,debugging and training.Client can evaluate our service according to these point.After finish his work,the engineer will offer a debugging acceptance form, please fill this form for our company so that we can provide best technical support in the future.
The first point,the engineer will test the machine and set up the machine with electricity and air.Then he will do the debugging and training until the machine is running good.
The second point,the engineer will explain every step with client’s worker.Combined with practical operation,let the worker learn the production of the paper straw.
The third point,the work pilot run the machine, The engineer guides the workers on the spot and starts the production
the engineer will disarrange the position and angle of the equipment that has been placed before, and reconnect the wiring and air connection.The engineer will simulate the whole process of installation, debugging and starting up production.Detailed explanation, combined with practical operation.On-site teaching enables operators to understand and understand the entire installation, debugging and production process of paper straw equipment.And instruct the operators on site to learn and operate this process.

The whole process includes:
1.The engineer set up the machine, install the tie rod, forming mold, cutting tool pad, adjust the tie rod and cutting tool pad in a straight line.
2.The machine will be connect with elecricity and air consumption.
3. Adjust the space between the left and right sides of the cutter and the position of the cutting tool.Put the belt.
4. Install and adjust the position of paper frame and glue frame.
5. Be familiar with the operation interface and parameter setting.
6. Paper loading (for straw of different sizes, please pay attention to the specification of the surface paper and the bottom paper), glue on the plastic tray, adjust the glue and pull the paper.
7. In the production of paper feed coil pipe, check whether the fold seam and incision of paper straw are neat, whether the length is consistent and whether it meets the standard.
8, stable production speed, paper, speed.If the quality of paper straw meets the standard.
9. Produce paper straw of different specifications;Modify the parameter setting, adjust the feed Angle, adjust the cutter distance, and adjust the position of the paper frame and glue frame.
The fourth point,the worker start up production independently, make paper straw with different sizes, get familiar with equipment, find problems, consult with the engineer, and solve problems by himself under the guidance of the engineer.
After installation,debugging and training,the client fills the form and give the engineer .

Related News